Painting Services
Interior and exterior painting—proper prep, repairs, matched sheen, and clean edges.
Interior Painting
Exterior Painting
Exterior Painting
LOREM IPSUM DOLOR SIT AMET
General Exterior Painting
We refresh home exteriors with thorough prep and weather-appropriate coatings. Surfaces are washed, scraped, sanded, caulked, and primed as needed before two uniform finish coats are applied. Careful masking, clean lines, and proper dry times deliver durable protection and improved curb appeal.
- Includes: pressure washing, surface prep (scrape/sand), minor wood/trim repairs, caulking, spot/full priming, two finish coats on scoped areas, protection of windows/landscaping, tidy cleanup.
- Options: elastomeric coatings for stucco, color changes or accent trim, low-odor systems, rust-inhibiting primer for metal, fascia/soffit add-ons.
Deck & Fence Staining
We clean, prep, and stain decks and fences to restore color and protect wood from sun and moisture. Proper dry times, even application, and the right stain type deliver a consistent finish that enhances appearance and extends service life.
- Includes: surface cleaning/brightening, mildew treatment, light sanding of raised grain, protection of adjacent areas, even stain application (brush/roll/spray as appropriate), tidy cleanup.
- Options: transparent, semi-transparent, or solid stains; color sampling; water- or oil-based systems; minor board replacement or fastener reset; UV-boost or water-repellent sealers.
STANING
Brick Painting
We clean and prepare brick surfaces, repair minor mortar issues, and apply breathable masonry coatings designed to bond without trapping moisture. The result is a refreshed, uniform appearance that modernizes curb appeal while protecting the brick from weathering.
- Includes: pressure washing/cleaning, efflorescence treatment where needed, minor mortar patching, masonry primer, breathable masonry paint application, protection of windows/landscaping, tidy cleanup.
Options: limewash or masonry paint systems, color sampling, stain or seal alternatives, and accent detailing.
LOREM IPSUM DOLOR SIT AMET
Exterior Doors & Trim Painting
We prepare and protect surrounding surfaces, repair minor defects, and prime for adhesion before finishing doors and trim with exterior-grade enamel. Careful cut lines, edge detailing, and proper dry times deliver a durable, weather-resistant finish that refreshes curb appeal and stands up to daily use.
- Includes: surface cleaning, sanding/de-glossing, minor patching, caulking at joints, bonding primer, 2 uniform enamel coats on doors/trim, hardware masking or removal, tidy cleanup.
Options: color change or sheen upgrade (satin/semi-gloss/gloss), front-door accent color, rust-inhibiting primer for metal, low-odor systems, hinge/handle replacement.
Choosing Exterior Sheen
Choosing the correct paint sheen is vital because it directly determines the paint’s durability, washability, light reflection, and ability to hide or highlight surface imperfections. The right choice balances aesthetic appeal with functional needs, ensuring walls resist stains in high-traffic areas while minimizing flaws in low-traffic rooms.
-
Walls/Siding: Flat or Satin
-
Trim & Doors: Semi-Gloss
-
Metal/Accents: Gloss (only if well-prepped)
Interior Painting
LOREM IPSUM DOLOR SIT AMET
General Interior Painting
We protect floors and furnishings, repair minor flaws, and match the right sheen to each room. After primer where needed, walls and trim receive two even coats with crisp cut lines. Daily cleanup and a tidy hand-off keep bedrooms, living areas, and halls usable.
- Includes: floor/furniture protection, masking, patching/sanding, caulking, spot/full priming as needed, two uniform finish coats on scoped surfaces, clean edges, daily cleanup, and final walkthrough.
- Options: low/zero-VOC or fast-dry systems, texture blending (orange peel/knockdown/smooth), color sampling or accent walls, enamel upgrade for doors/trim, and minor drywall repairs beyond standard patching.
- Dry time: typical recoat 2–4 hours (product-dependent); light use same day; full cure ~7 days.
Accent Walls
A focused color adds depth and anchors the room. We confirm the hue with samples, mask adjacent surfaces, and cut precise lines. The wall is patched, sanded, and primed as needed, then finished in the selected sheen to coordinate with your palette.
- Includes: color sampling, masking (ceiling/adjacent walls/trim), patching/sanding, caulking, spot/full priming as needed, two uniform finish coats, crisp cut lines, tidy cleanup.
- Options: low/zero-VOC or fast-dry systems, sheen selection (matte/eggshell/satin), subtle texture blend (smooth/orange peel/knockdown), geometric separation lines/stripes, and minor drywall repairs beyond standard patching.
ACCENT
Cabinet Painting
Cabinets are degreased, sanded, and primed for adhesion, then finished with durable enamel or urethane. Doors and drawers are labeled, hardware protected, and spray or fine-roll techniques achieve a smooth, even surface. The process updates your kitchen’s look without demolition, with careful containment and a clean workspace.
- Includes: degreasing/de-glossing, scuff sand, masking and containment, door/drawer labeling, hardware removal or masking, bonding primer, 2–3 enamel coats, reassembly, hinge/door alignment, tidy cleanup.
- Options: two-tone islands, sheen (satin/semi-gloss), new pulls/handle re-drill, soft-close hinge swap, grain-fill on oak, inside-box painting (quoted separately).
Ceiling Painting
We cover floors and furnishings, spot-repair cracks, and seal stains before coating. Ceilings are typically finished in a flat to reduce glare and hide minor imperfections. Using extension rollers and controlled cut-ins, we deliver a uniform surface across rooms, including kitchens, baths, and high-traffic areas where touch-ups are common.
- Includes: floor/furniture protection, masking lights/vents/sprinklers, crack & nail-pop repairs, stain-blocking primer, caulking where needed, two uniform finish coats (flat/matte), clean edges, daily cleanup.
- Options: low/zero-VOC or fast-dry coatings; bath-rated/moisture-resistant paints; minor texture blending (orange peel/knockdown/smooth); repaint ceiling grids/registers; non-white ceiling colors.
LOREM IPSUM DOLOR SIT AMET
Crown Molding Installation
Trim is cleaned, nail holes filled, and seams caulked for sharp lines. After light sanding and primer where needed, we apply a durable semi-gloss or enamel finish. Careful cutting along ceilings and walls ensures crisp edges, elevating the room with a clean, uniform profile that complements doors and baseboards.
Door Painting
We remove or mask hardware, sand for smoothness, and prime for adhesion. Doors are finished with durable enamel or semi-gloss using brush, fine-roll, or spray methods to minimize texture. Suitable for panel, flush, and entry doors, with careful edge work, proper dry times, and clean reinstallation for everyday use.
- Includes: hardware removal or masking, surface sanding/de-glossing, bonding primer, 2 uniform enamel coats, edge detailing, hinge alignment, tidy cleanup.
- Options: spray finish for ultra-smooth results, color change or sheen upgrade, new hinges/knobs installed, exterior-rated systems for entry doors, low/zero-VOC products.
DOORS
Wallpaper Removal
Old wallpaper is scored and soaked, then lifted using steam or an enzyme solution. We fully remove adhesive residue to prevent future bubbling or peeling. Walls are skim-coated to correct minor damage, sanded smooth, and primed for paint or new covering—leaving a clean, uniform surface throughout the room.
- Includes: protection of floors/furniture, scoring, soak/steam removal, adhesive cleanup, minor patching/skim as needed, sanding with dust control, stain-blocking/adhesion primer, tidy cleanup.
- Options: full skim coat for perfect smooth walls, texture match (orange peel/knockdown), re-wallpaper prep (liner paper), low/zero-VOC primers, paint finish service after removal.
- Notes: multiple layers, vinyl paper, or damaged drywall may require additional skim/repairs.
Popcorn Ceiling Removal
Remove outdated popcorn texture for a clean, modern ceiling. We isolate the room, protect floors and walls, and safely scrape the texture. Surfaces are then repaired, skim-coated, sanded smooth, and primed—ready for paint with a uniform, updated look throughout the space.
Includes: full room containment, floor/wall protection, texture removal, minor ceiling repairs, skim coat where needed, sanding with dust control, stain-blocking primer, tidy cleanup.
Options: smooth finish or re-texture (light orange peel/knockdown), ceiling repaint, moisture-resistant paint for baths, after-hours scheduling if occupied.
Notes: testing for asbestos may be recommended for homes built before the mid-1980s; additional repairs quoted if substrate damage is found.
LOREM IPSUM DOLOR SIT AMET
Caulking & Priming (where needed)
We seal gaps, joints, and transitions to prevent moisture intrusion and create clean, finished lines before painting. Proper priming ensures adhesion, blocks stains, and delivers uniform color—so topcoats perform better and last longer on walls, trim, doors, and ceilings.
Includes: removal of failed caulk, application of paintable sealant at joints and seams, surface cleaning, spot or full priming as needed, protection of adjacent areas, tidy cleanup.
Options: mildew-resistant caulk for baths/kitchens, stain-blocking or bonding primers, exterior-grade sealants, full-room primer before repaint.
Drywall Repair
We repair holes, cracks, dents, and damaged drywall sections to restore smooth, solid walls and ceilings. Repairs are secured, leveled, sanded, and primed so the finish blends naturally with surrounding surfaces—ready for paint or touch-up without visible patches.
- Includes: protection of floors and furniture, removal of loose material, patching or board replacement, sanding with dust control, spot priming, tidy cleanup.
- Options: paint touch-in or full repaint, stain blocking for water marks, corner-bead repair, and access panel installation.
- Notes: active moisture issues must be resolved before repairs begin.
REPAIR
Tape, Bed & Texture Repairs
We correct failed joints, cracks, and uneven seams using proper tape, bedding, and floating techniques. Texture is blended to match existing finishes—smooth, orange peel, or knockdown—so repairs disappear once painted and surfaces look continuous again.
Includes: joint re-taping, bed/float coats, seam leveling, texture matching, sanding with dust control, spot priming, clean edges, tidy cleanup.
Options: full skim coat for heavily patched areas, texture upgrades, ceiling crack repair, paint finish service after repair.
Notes: Structural movement or framing issues may require additional correction beyond surface repair.